Data Sheet

DX168 Technical Datasheet 2 Allen & Heath Ltd
Dimensions
A&E Specifications
The unit shall be a portable remote audio device for the
dLive mixing system. The remote audio unit shall provide 16
XLR inputs with individually configured Phantom Power and
8 XLR outputs. Phantom power LED indicators shall be
provided per input socket on the remote audio rack.
Two Ethercon DX link connectors shall be provided for
transport of the digital audio and control signals. The unit
shall be able to operate in ‘redundant’ or ‘cascade’ mode by
means of a mechanical switch. In ‘redundant’ mode the unit
shall provide full redundant connection to the Mixrack or
Surface. In ‘cascade’ mode the unit shall allow series
connection of two units.
The Ethernet protocol shall provide control to the remote
preamp, and all mic preamps are scene recallable by the
digital mixing system. Unit firmware shall automatically be
updated when connected to the digital mixing system.
The remote audio rack shall have a robust steel chassis and
shall be designed to be portable and to be placed
horizontally or vertically on the stage or performance
environment.
A carrying handle shall be provided to facilitate lifting and
holding the device when moving and an optional padded
dust cover shall be available.
The remote audio rack shall also be mounted in a 19”
equipment rack or case using an optional remote audio rack
kit.
The remote audio rack shall have a built-in power supply
accepting AC mains voltages of 100~240V, 50/60 Hz, 35W
max via an earthed 3-pin IEC male connector mounted on
the rear chassis.
Recommended operating temperature for the remote audio
rack shall be 0 to 35 degrees Celsius.
The unit shall be the Allen&Heath DX168.