Brochure









Front and rear panels

 DX Link 1-4 Four DX Link sockets each capable of 32x32 channels of

96kHz audio. Each DX Link socket can be connected to 1 DX32 or up to 2

DX168/DX16-4W expanders. A status LED flashes yellow for Link activity and

illuminates red to indicate a stream error.

 gigaACE For connection to an SQ SLink port, or gigaACE card in a dLive

system. The gigaACE connection provides 128x128 channels of audio at

96kHz. A status LED flashes yellow for Link activity and illuminates red to

indicate a stream error.

 Vents Ensure good ventilation at the rear of the DX Hub. Avoid obstruction

of vents while operating. Avoid dirt or liquid ingress. Maximum operating

temperature 40°C

 Power IEC connector and fuse for the built-in universal voltage power

supply unit. This accepts voltages from 100 to 240V AC 50/60Hz. Check that

you have received the correct mains lead for your territory.

Read the Safety Instructions Sheet included with the product and the information printed on the panel before operating.

A limited one year manufacturer’s warranty applies to this product, the conditions of which can be found at:

www.allen-heath.com/legal

By using this Allen & Heath product and the software within it you agree to be bound by the terms of the relevant End

User Licence Agreement (EULA), a copy of which can be found at: www.allen-heath.com/legal

Check the Allen & Heath website for the latest documentation and software updates

ALLEN&HEATH