ALLEN&HEATH ALL RANGES ALLEN&HEATH Kernick Industrial Estate Penryn · Cornwall TR10 9LU · UK +44 (0)1326 372070 fax: +44 (0)1326 377097 tel: email: sales@allen-heath.com website: www.allen-heath.com www.idrseries.com Allen & Heath reserve the right to alter any information supplied in this document or any other documentation supplied hereafter. Training courses for iDR system building are available worldwide. Check www.idrseries.com for details or email training@allen-heath.
ALLEN&HEATH SOUND MANAGEMENT ALLEN&HEATH is trusted by hundreds of thousands of audio professionals to provide outstanding audio to venues around the world. For over 35 years, we’ve produced great mixers for recording, broadcast, live sound, installed systems and DJ’s, and our hands-on experience is second to none in the industry.
iDR SERIES WHAT IS IT? iDR SERIES WHY IS IT SO USEFUL? Network control Automatic Level Management Audio Quality The main iDR units can be easily controlled and programmed with an Ethernet connection to a PC [or MAC running OSX & PC simulator]. All iDR units on a network can be ‘seen’‚ by more than one computer, with optional password protection so that operators can be observed by a technician running iDR System Manager software - or PL Client software - anywhere on the network or World Wide Web.
iDR -8 iDR -4 Features of iDR-8 Features of iDR-4 ✱ iDR DSP system - 16 processing channels (inputs and outputs) ✱ 8 analogue mic/line inputs on XLR ✱ ✱ 2 line outputs on TRS jack ✱ Digital audio expansion port with 48V phantom power ✱ 8 analogue line outputs on XLR 2 line inputs on TRS jack ✱ Hot Plug‘n’Play PL Series High Quality Audio Signal Path and ✱ DSP processing ✱ Headphone monitor with mouse and ✱ MIDI in/out/through connections iDR DSP system - 16 processing channels (inputs
iDR -In & -Out EXPANDERS iDR CONTROL iDR-In A glance at the iDR back panel reveals the scope of iDR’s control capabilities. iDR can communicate with many forms of equipment utilising industry standard communication protocols. For example, iDR-switch units, iDR-in and iDR-out expanders, third party controllers, PL Series ‘intelligent’ wall plates, MIDI show controllers, PCs, networks and modems.
iDR System Technical Specifications Audio Specifications Performance Frequency Response Inter-channel Crosstalk THD + noise Residual output noise Input to Output noise 20Hz to 20kHz +0/- 0.5dB <-80dB @ 1kHz, 0dB gain <0.
PL -Series The PL series is the perfect interface between the iDR and the operators on site who don’t need to understand the sound system - just control it. As the requirements grow at an installation, the control system PL-7 can too! Start off with just the controls and display on the iDR unit then add wall mounted plates and handheld remotes wherever they are needed using our CAT5 PL-Anet cabling system. PL remotes can simply daisy chain or use the PL-Anet hub for star wiring applications.
PL SOFTWARE PL Designer and Client for WindowsTM iDR SYSTEM MANAGER SPECIFICATIONS Operating System iDR Unit Software, Internal Compressor (x16) Update using TCP/IP via system manager, RS232 via Hyperterminal System Configuration As well as being controlled by iDR System Manager, iDR systems can be controlled via a PC using ‘PL Client’, an interface which can be designed in ‘PL Designer’. iDR System Manager software PC compatible running online or offline session.
DR 66 Technical Specifications 0 dBu = 0.775 Volts rms The DR66 is a Digital Signal Processing Matrix Mixer which can be used for a huge number of sound installation applications.
Technical Specifications GR 05 0dBu = 0.775 Volts rms, +4dBu = 1.23V rms, 0dBV = 1 Volt rms, -10dBV = 316mV rms Maximum output level Impedance balanced +20dBu into 2k ohm Frequency response 20Hz to 30kHz 0/-1dB Distortion - measured at +12dBu 1kHz Line in to Output < 0.
