User guide

Qu Mixer User Guide 55 AP9372 iss.2
Stream audio to the computer – Audio is sent via
USB B. Go to the Setup / Output Patch / USB Audio
screen to choose which Qu outputs to patch to the
USB stream.
Stream audio back to the Qu mixer – Audio is
returned via USB B. This is mapped one-to-one to the
inputs channels. Use the Preamp screen Fn key
Source page to patch USB B to the channels.
Make sure you have set ‘USB B Streaming’ as the
global USB source.
The following sources can be patched:
X Unassigned
CH Mono channel pre processing
ST Stereo channel pre processing
FX Ret FX returns 1-4 pre-fader
Grp Group post-fader (not Qu-16)
Mix Mix 1-10 post-fader
LR pre Main LR mix – pre-fader
LR post Main LR mix – post-fader
L+R pre Main LR mono sum – pre-fader
MTX Matrix post-fader (not Qu-16)
PAFL Stereo PAFL monitor