New Products and Solutions Directory Self-Guided Tour
Product-by-booth Table of Contents Energy Management – Booth 1023 Allen-Bradley PowerMonitor 5000 Power Quality Meter.....5 Essential Components – Booth 419 Allen-Bradley PowerMonitor 5000 Power Quality Meter.....5 Allen-Bradley IO-Link Solutions.....6 Allen-Bradley Food and Beverage Inductive Proximity Sensors.....7 Allen-Bradley Process Terminal Block.....8 Allen-Bradley Electronic Circuit Protection Module.....9 Allen-Bradley T/H Trigger Action E-stop.....
Product-by-booth Table of Contents Allen-Bradley Armor GuardLogix Controller.....31 Allen-Bradley FLEX HART-enabled Isolated Analog 8 Input Module, Extreme Environment.....32 Allen-Bradley Modules ControlLogix Isolated Analog Modules.....33 Allen-Bradley Kinetix 5500 Network Safety Servo Drive.....34 Allen-Bradley XM-124 Standard Dynamic Measurement Module.....35 Allen-Bradley Dynamix 1444 Series Monitoring System.....36 Rockwell Software Studio 5000 Design and Configuration Software v22.....
Product-by-booth Table of Contents Kepware.....60 Littlefuse.....62 MTE Corporation.....64 MYNAH Technologies.....65 Panduit Integrated.....66 Pentair Equipment Protection (Hoffman®).....68 Posital FRABA Inc.....72 Powerit Solutions.....73 Prosoft Technology.....74 Spectrum Controls Inc.....78 Tolomatic.....82 Yaskawa Motoman.....
Allen-Bradley PowerMonitor 5000 Power Quality Meter The Allen-Bradley PowerMonitor 5000 power quality meter includes core power and energy metering capabilities, and takes energy monitoring to the next level with additional features, including: a virtual wiring correction, sag/swell detection alert, more conditional set points and single-cycle metering. This scalable power meter can be fully integrated into a plantwide network.
Allen-Bradley IO-Link Solutions Allen-Bradley IO-Link enabled technology provides seamless visibility of field devices across the Rockwell Automation Integrated Architecture system. IO-Link is an open-standard protocol that allows field devices to “talk” to the industrial Ethernet network cost-effectively, while providing detailed diagnostics, device identity information and multiple bit I/O data messages.
Allen-Bradley Food and Beverage Inductive Proximity Sensors The Allen-Bradley food and beverage inductive proximity sensors are designed to address the most demanding applications in the food and beverage industry. These sensors withstand high-pressure and high-temperature washdowns, while offering superior resistance to corrosion and damage caused by harsh cleansing agents.
Allen-Bradley Process Terminal Block Allen-Bradley process terminal blocks are designed to improve the way signal routing and distribution are performed. In process applications, incoming signals from field instrumentation devices are often connected using terminal blocks within marshaling panels to help organize and route signal wires to the control panel. With the increase of field devices in a process plant, the efficient use of panel space becomes critical.
Allen-Bradley Electronic Circuit Protection Module The Allen-Bradley electronic circuit protection module provides solid-state protection for secondary circuits off-switch mode power supplies. Faster than the self-protection of the power supply, the module is designed to accommodate inductive and capacitance loads to help users reduce nuisance tripping. The module monitors input voltage and output current.
Allen-Bradley Trigger Action E-stop The Allen-Bradley trigger action e-stop is designed and constructed to perform consistently in the most demanding industrial environments. Key features of the new product include its global acceptance, tamper resistance and state-of-the-art illumination. Trigger action functionality provided in a 30.5 mm form factor delivers e-stop operators that meet global requirements.
Allen-Bradley Integrated Motion on EtherNet/IP Encoder The Allen-Bradley integrated motion on EtherNet/IP absolute encoders are designed for motion control applications that require feedback-only axes. These encoders support the standard motion instruction set in the Rockwell Software Studio 5000 Logix Designer application. By providing auxiliary feedback directly through an EtherNet/IP network, these encoders eliminate the need for point-to-point wiring.
Allen-Bradley VersaCube Rectangular Multi-position Inductive Proximity Sensor The Allen-Bradley VersaCube rectangular multi-position sensors are an economical and versatile solution for long-range sensing needs in a convenient, compact package. Weld-field immune models are available with the choice of AC/DC or DC. Specific DC weld-field immune models offer equal sensing capabilities for all metals. Booth 419 – Essential Components Todd Bissell Rockwell Automation tmbissel@ra.rockwell.
Allen-Bradley Dual-port EtherNet/IP Adapter The Allen-Bradley Dual-port EtherNet/IP adapter provides an internal network connection for Allen-Bradley PowerFlex 70, 700, 700H, 700S and 7000 AC drives; PowerFlex DC drives; and Allen-Bradley SMC Flex and SMC-50 smart motor controllers. The adapter is field-installable and provides a convenient way to control, configure and collect data over an EtherNet/IP network.
Allen-Bradley E300 Electronic Overload Relay The Allen-Bradley E300 electronic overload relay includes a modular design, communication options, diagnostic information, simplified wiring and integration with the Rockwell Automation Integrated Architecture system. The relay provides flexibility, reduces engineering time, and maximizes uptime for important motor starter applications. Booth 419 – Essential Components Sarah Larson Rockwell Automation selarson@ra.rockwell.
Allen-Bradley IEC International-style Limit Switches The Allen-Bradley 802K non-safety and 440P safety limit switches have a range of options including snap action or slow break/make with two or four contact configurations and a choice of actuator heads. The head can be rotated in 90 degree increments for easy mounting. Operation of these limit switches is achieved by the sliding action of the guard or other moving object deflecting the plunger or lever.
Allen-Bradley Micro800 Motion Feedback Axis Plug-in The Allen-Bradley Micro800 motion feedback axis plug-in allows high-speed counters to be added to Micro800 controllers. When used with a Micro800 controller’s PTO axis, the plug-in can provide position feedback from the servo drive for position verification. It also can be used with an encoder for position and velocity monitoring. The plug-in supports 5V differential line driver input up to 250kHz and 24VDC input up to 100kHz.
Allen-Bradley Micro800 DeviceNet Scanner Plug-in The Allen-Bradley Micro800 DeviceNet Scanner plug-in enhances the communication capabilities of Micro800 controllers with support for up to 20 nodes of PowerFlex AC drives or Allen-Bradley CompactBlock LDX I/O. This additional support reduces the wiring and installation costs for larger standalone machine applications, such as conveyor applications where drives and I/O are distributed over longer distances.
Allen-Bradley Micro800 Remote LCD Display The Allen-Bradley Micro800 remote 3.5 inch LCD display is an essential accessory for the Micro820 controller. It supports four or eight lines of ASCII text, has a keypad with programmable function keys, and is rated IP65 for mounting through a cabinet door when used as a simple operator interface. It can be used to configure the controller and support DIN-rail mounting next to the controller.
Allen-Bradley Micro820 20-pt Controller The Allen-Bradley Micro820 20pt controller is specifically designed for smaller standalone machines and remote automation projects with embedded Ethernet, serial ports and a microSD slot for data logging and recipe management. The controller can function as a remote terminal unit (RTU) for remote machines with support for Modbus RTU and transmission control protocol.
Allen-Bradley 1609 Next Generation Uninterruptible Power Supply The Allen-Bradley 1609 next generation uninterruptible power supply (UPS) is uniquely designed to provide back-up AC power to the control cabinet. If necessary, the 1609 UPS will facilitate the safe shut-down of an industrial personal computer, programmable logic controller, data-logging human-machine interface or any other critical device in the control scheme.
Allen-Bradley Connected Components Tools The Allen-Bradley Connected Components Accelerator Toolkit provides information for quick and easy implementation of common control tasks in machine design. The preconfigured building blocks allow for concentration on machine design and performance, rather than time-consuming programming and validation.
Allen-Bradley Intrinsic Safety Barriers The new Allen-Bradley intrinsic safety barriers convert and/or condition signals from hazardous location field devices (such as sensors and condition transmitters) into low-energy, intrinsically-safe signals that can interface with equipment in the safe area.
Allen-Bradley Stratix 5100 Wireless Access Point With its IEEE 802.11n rated enhancements, the Allen-Bradley Stratix 5100 wireless access point delivers the most advanced performance, functionality and reliability in its class of robust wireless communications. The wireless access point is offered in three form factors, including wall/mast, DIN rail and on-machine, and has industrial ratings for shock, vibe and temperature for a variety of application needs.
Allen-Bradley Stratix 5900 Security Appliance The Allen-Bradley Stratix 5900 security appliance provides a rapidly deployable, highly available, reliable and secure solution designed specifically for machine-to-machine applications. Fully integrated with Cisco IOS software, the Stratix 5900 security appliance delivers enterprise-class features including highly secure real-time control communication, routing, firewall, VPN and intrusion protection capabilities.
FactoryTalk Historian Site Edition v4.0 FactoryTalk Historian Supervisory Edition (SE) software v4.0 provides users with a more scalable solution for larger historian deployments. The performance improvement could be up to 5 times 3.x revision. The backfill of archive feature will now provide an easier approach for bringing older data into the new historian deployment. Microsoft Office 2013 support helps users visualize historian data in the latest Microsoft Excel deployments.
FactoryTalk Metrics v11.0 Performance metrics – like equipment and material use and overall equipment effectiveness – can provide customers with critical insight into how well they are managing their production operations. FactoryTalk Metrics enables manufacturers of all types and sizes to increase production, reduce costs, and increase quality using existing equipment and labor more effectively. This is accomplished through accurate reporting of real plant-floor activity.
FactoryTalk VantagePoint EMI v5.0 FactoryTalk VantagePoint enterprise manufacturing intelligence (EMI) software v5.0 adds capabilities for mobile access, enterprise reporting with example reports using SQL queries of the unified production model (UPM), and type system enhancements that accelerate time to value in building the UPM.
Allen-Bradley VP Food Grade Servo Motor The Allen-Bradley VP food-grade servo motors combine high-efficiency, high-torque capability with features specifically designed to meet the unique needs of many food and beverage applications. These highperformance motors address the challenges of food environments by incorporating improved sealing techniques and noncorrosive food-grade fasteners and coatings.
Allen-Bradley Kinetix 5500 Servo Drive DSL Feedback Converter The new Allen-Bradley Kinetix 5500 servo drive converter is designed to convert HIPERFACE feedback to DSL.
Allen-Bradley 1732E ArmorBlock Dual-Port Ethernet with QuickConnect Modules The new Allen-Bradley 1732E ArmorBlock dual-port Ethernet QuickConnect modules have 5-pin mini auxiliary power ports. Three ArmorBlock QuickConnect modules are available for use with the Allen-Bradley ControlLogix 1756-L6x and 1756-L7x and Allen-Bradley GuardLogix 1756-L6xS, 1756-L7xS or third-party controllers. The QuickConnect functionality enables the modules to power up and establish a network connection within 500ms.
Allen-Bradley Armor GuardLogix Controller With the release of the Allen-Bradley Armor GuardLogix controller, Rockwell Automation extends the ControlLogix platform to round out the On-Machine space. This SIL3 safety controller supports the full temperature range of ControlLogix, while offering global certifications and ratings for IP67 washdown protection.
Allen-Bradley FLEX HART-enabled Isolated Analog 8-Input Module, Extreme Environment The Allen-Bradley FLEX 1794-IF81HNFXT HART-enabled isolated analog 8-input module for extreme environments is an enhanced version of the current 1794-IF81H module. It can operate at temperatures between minus 25 C to 70 C and includes a modified input filter, conformal coating and is RoHS-compliant. It has eight isolated input channels with an independent HART modem per channel. It is also HART 7.
Allen-Bradley ControlLogix Isolated Analog Modules Rockwell Automation continues to build on its Integrated Architecture with the addition of three new isolated analog modules, making the Logix Control Platform more technically capable than ever before. Seven existing I/O modules have been re-architected into three new designs with increased channel count, higher precision, faster response times and interface capabilities that are second to none.
Allen-Bradley Kinetix 5500 Network Safety Servo Drive The Allen-Bradley Kinetix 5500 network safety servo drive is designed to integrate control, motion and safety – all on a single network. With the network safety capabilities in the drive, the zones are no longer hard wired, which reduces wiring costs and installation time for safe torque-off. The new Kinetix 5500 network safety drive is in compliance with global safety standards, SIL 3, Ple.
Allen-Bradley XM-124 Standard Dynamic Measurement Module The Allen-Bradley XM-124 module is an intelligent, two-channel, general-purpose monitor. The module supports monitoring of shaft, casing or pedestal vibration in rotating equipment such as turbines, motors, pumps, compressors, fans and most other common rotating machinery where real-time condition monitoring or protection is required. The XM-124 module is capable of dynamic measurements from as low as 0.
Allen-Bradley Dynamix 1444 Series Monitoring System The Allen-Bradley Dynamix 1444 series dynamic measurement module is a four-channel, general-purpose monitor capable of serving almost any industrial machinery protection or condition monitoring application. The module supports measurements of dynamic inputs such as vibration and pressure, as well as static inputs such as thrust, eccentricity and rod drop.
Rockwell Software Studio 5000 Design and Configuration Software v22 Rockwell Automation launched Rockwell Software Studio 5000 Logix Designer in 2012 to begin the development of an integrated design environment that enables users to easily program and configure all aspects of the Rockwell Automation Integrated Architecture system. In Studio 5000 v22, the system organizer provides an additional, central way to contextualize information to those who need it, when they need it.
Allen-Bradley CENTERLINE 2100 and 2500 Motor Control Centers Allen-Bradley CENTERLINE 2100 and 2500 motor control centers (MCCs) include the new Allen-Bradley E300 overload relays for improved diagnostics to help users monitor motor performance and proactively address motor issues – all on embedded EtherNet/IP. The MCCs also include an option for Allen-Bradley PowerFlex 525 AC drives with standard embedded EtherNet/IP for up to 22kW/30Hp. Allen-Bradley IntelliCENTER software v5.
Allen-Bradley Option Module for ATEX Certification of Allen-Bradley PowerFlex 750-Series Drives A new ATEX option module enables Allen-Bradley PowerFlex 750-Series AC drives to be used in systems that require control of motors that are located in potentially explosive environments. When used with an 11Series I/O module and the ATEX daughter card option module, the PowerFlex 753 and 755 drives are TÜV certified to stop providing energy to motors when motor temperature becomes too high.
Allen-Bradley PowerFlex 523 AC Drive The Allen-Bradley PowerFlex 523 AC drive helps users simplify equipment design and operation, and speed installation and configuration. The latest in the 520-Series of next-generation compact drives, the PowerFlex 523 AC drive features a modular design in power ranges from 0.18 to 11 kw or 0.25 to 15 horsepower at 100 to 600 volt input. Its flexible installation, energy savings and motor control options are ideally suited for stand-alone machines.
Allen-Bradley PowerFlex 750-Series Drives Allen-Bradley PowerFlex 750-Series AC drives represent a comprehensive drive family with a growing selection of features and options. Designed for flexibility, productivity and ease of use, these drives boast an impressive power range extending from 0.75 kw/1 horsepower all the way up to 1500 kw/2000 horsepower and are available at 400/480/600/690 volts.
Allen-Bradley PowerFlex 7000 Medium Voltage Drives Allen-Bradley PowerFlex 7000 medium voltage AC drives now offer enhanced torque control capabilities. Ideal for heavy-industry applications, such as hoists, drag lines, winches and test stands, the PowerFlex 7000 drive can deliver 100 percent torque at zero speed. This new capability continuously controls torque around zero speed and provides a higher drive speed and torque response required for these applications.
Rockwell Automation AADvance Workbench 2.0 for Safety and Critical Control The AADvance Workbench 2.0 helps process safety applications get up and running faster. Ideally suited for applications that require a flexible architecture, distributed safety and mixed SIL Levels, the AADvance Workbench is a complete design, configuration and maintenance software environment.
Rockwell Automation ControlLogix HART I/O Modules Requirements for product consistency/quality are elevating the importance of the control system to deliverrepeatable data 24/7. The analog I/O’s ability to deliver accurate measurements and allow field device remote configuration and diagnostic impacts this requirement.
Rockwell Automation PlantPAx Library of Process Objects 3.0 The Rockwell Automation PlantPAx Library of Process Objects is a predefined library of controller code (add-on instructions), display elements (global objects), and faceplates that let users quickly assemble large applications with proven strategies, rich functionality and known performance. Built with consideration given to international standards such as color, functionality and symbols, these objects are a good fit for many industry sectors.
Rockwell Automation PlantPAx Sequencer Object The Rockwell Automation PlantPAx Sequencer Object provides users with a quick and easy way to automate procedures. It provides a flexible, controller-based, step sequencing solution independent of application servers and software. Users can automate procedures directly through a standard user interface without the need for custom programming.
Rockwell Automation PlantPAx Process Automation System Release 3.0 The Rockwell Automation PlantPAx process automation system includes all the core capabilities expected in a world-class distributed control system and more.
Rockwell Automation PlantPAx Virtual Image Templates 3.0 Rockwell Automation has launched the industry’s first production-grade virtual image templates to help users quickly deploy preinstalled system servers, operator workstations and engineering workstations on their virtualization infrastructure. The PlantPAx Virtual Image Templates deliver the core system elements as preconfigured, drop-in templates on a USB hard drive.
Allen-Bradley Guardmaster GSR-830 Safety Relay The Allen-Bradley Guardmaster GSR830 is a cost-effective and easy-to-use software-configurable safety relay for safety applications with four to 10 safety circuits and up to two or three zones. Designed in the compact Allen-Bradley Micro830 controller package, the GSR830 safety relay uses the Allen-Bradley Connected Components Workbench programming environment.
Allen-Bradley SafeZone Mini Safety Laser Scanner The Allen-Bradley SafeZone mini safety laser scanner is a compact device that has a single configurable safety field and up to two warning fields. Designed for stationary and mobile applications, it has a scanning angle of 270 degrees. The safety configuration and diagnostic Windows-based software simplifies programming of the scanner. This scanner is a flexible, rugged, cost-effective solution suited for a wide range of industrial safety applications.
Rockwell Automation Industrial Data Center Virtualization has become widely adopted as a standard in the information technology industry and is a growing trend in the manufacturing and production industries. Rockwell Automation now offers the Industrial Data Center to help realize cost savings through a pre-engineered, scalable infrastructure that enables users to run multiple operating systems and multiple applications on virtualized servers.
AMCI 3-in-1 Motion Controller Combines EtherNet/IP and Rugged IP67 Rating The AMCI 3-in-1 integrated motion control package incorporates IP67 protection and rugged M12 connectors for exceptional durability. The M12-connector option eliminates the vulnerability associated with RJ45-style connectors in industrial environments where cable flex and contaminants are a persistent issue.
Endress+Hauser Liquiline Multichannel Analytical Transmitter CM44x new with EtherNet/IP™ The Liquiline CM44x multiparameter transmitter with ISEmax CAS40D and Oxymax optical COS61D sensors accurately and efficiently measures the levels of ammonium, nitrate and dissolved oxygen. Seamless integration into Rockwell Automation Integrated Architecture™ is now possible with EtherNet/IP™ communication protocol. With Memosens technology, one controller can now be used for all parameters.
Endress+Hauser’s Heartbeat Technology™ With the new and innovative Heartbeat Technology™, it is possible to monitor, diagnose and verify a flow meter’s capabilities to ensure proper operation and function. Heartbeat Technology is continuously online evaluating a meter’s diagnostics and sensor integrity. In the case of a diagnostic problem, actionable remedy instructions are provided for fast and safe troubleshooting. The self-monitoring Heartbeat Technology significantly extends calibration life cycles.
HPS Centurion® R Series Line Reactor Hammond Power Solutions is introducing a new line of reactors to reduce product size and improve performance. The Centurion® R line reactors provide extra protection for drives, and are now UL listed for both open core and enclosed configurations. They are available in standard ratings from 0.5HP to 1200HP, up to 600V (690V with de-rating) and are fully compliant with UL, CSA, IEC and NEMA.
HPS EnduraCoilTM Cast-Resin Transformer To complement its VPI offering, HPS has introduced a new line of cast-resin transformers, the HPS EnduraCoilTM.. HPS EnduraCoil transformers are designed and constructed for maximum performance in harsh environments. These cast-resin transformers are CSA certified and suitable for even the most challenging commercial and industrial applications, generally found in data centers and marine, petrochemical, and pulp and paper industries.
Hardy HI 6500 Weight Processor The Hardy HI 6500 series of weight processors is designed for seamless integration into Rockwell Automation manufacturing platforms with standardized EtherNet/IP, AOPs, AOIs and faceplates to reduce the total cost of design, development and deployment (TCD^3). The HI 6500 will process and output stabilized weight data from analog load cells commonly found in noisy industrial weighing applications.
Helm Instrument Co. Inc. HM1734-LCP Load Cell Power Module The HM1734-LCP Load Cell Power Module is a self-contained power bridge designed to provide bridge excitation. The excitation voltage is +5 VDC. It’s designed for installation on the din rail next to the HM1734-WM Weigh Scale module for an easy user interface. The power module can accept up to four load cells and is well suited for interface with load cells configured at less than 350 ohms.
Helm Instrument Co. Inc. HM1734-PLM Strain Gage Input Module The HM1734-PLM is a single channel strain gage input module designed for dynamic-force monitoring. The module, with 12-bit resolution and a 100 microsecond conversion rate, will accept input from the Helm HT-400 strain gage sensor and any industry standard 350 ohm load cell. The module monitors high and low alarm settings and is capable of accepting a cam input for high speed processes.
Enhanced EFM Exporter for KEPServerEX Many oil and gas pipeline flow devices and flow computers have the ability to store raw historical flow data and perform computations on this data. KEPServerEX drivers with electronic flow measurement (EFM) capabilities poll devices and retrieve data on an interval basis.
Security Policies Plug-In for KEPServerEX The Security Policies Plug-In for KEPServerEX allows administrators to selectively assign security access permissions to individual objects (such as channels, devices and tags) based on the role of a user interacting with the Runtime project. The plug-in is used in conjunction with the server’s User Manager, which is used to manage user groups, users, and default security settings.
Littelfuse L3100 Series Ground and Phase Detector The EL3100 meets the NEC 250.21 and the CEC 10-106(2) requirements for ground detectors for ungrounded AC systems. It also can be used as a phase-voltage indication system for grounded threephase systems. Three high-intensity green LEDs can indicate the presence of phase-to-ground voltage by dimming one of the lights, while one red LED indicates a ground fault.
Littelfuse Industrial Shock Block SB6100 The Littelfuse Industrial Shock Block is the first and only UL listed Industrial GFCI (Ground-Fault Circuit Interrupter) for personnel protection at 480V/600V. A ground fault occurs when there is a break in the intended electrical path resulting in electricity trying to get to the ground by the shortest path, which could be through a person. This can result in electrical shock and even death.
MTE Corporation’s SineWave GuardianTM Motor Protection Filter Improve efficiency, motor life and the bottom line with the new SineWave GuardianTM from MTE – the power quality experts. Motor protection and power quality don’t have to be a mystery. MTE makes it easy. Case in point: the new SineWave Guardian filter. This best-in-class filter delivers unequalled performance in cleaning the PWM waveforms generated by VFDs.
MYNAH Technologies MiMiC Simulation Software v3.5 MYNAH Technologies has released MiMiC v3.5, dynamic, multi-purpose simulation software for plant lifecycle business results. MiMiC addresses the need to improve the operations of process plants through the use of dynamic simulation for control system development, testing and optimization, operator training, process hazard analysis review and operational excellence (OPEx) initiatives. MiMiC v3.
Panduit Integrated Network Zone System As rapid advancements in networking, computing, data storage and software capabilities increase the value of automation systems, engineers are under pressure to refresh machine and plantwide systems with solutions that merge information and control data. The Integrated Network Zone System enables seamless communications between control rooms and the manufacturing floors within industrial facilities.
Panduit Opti-Core® IndustrialNet™ PCF Fiber Cables and LC Connectors Fiber cabling is becoming pervasive in the industrial automation market. Robust fiber is required for industrial applications including direct connect, device-level rings and uplinks. Users are often cautious when considering whether to deploy fiber, with concerns that fiber cabling is too complicated and expensive to specify, design, and install.
Hoffman® Vortex A/C Enclosure Coolers, Hazardous Locations Hoffman® Hazardous Location Vortex A/C Enclosure Coolers keep electrical and electronic enclosures cool, clean and protected. With almost no moving parts, these enclosure coolers deliver dependable operation. A slight pressurization is maintained in the enclosure to keep electronic components clean and dry.
Hoffman® Purge and Pressurization Offering For applications that must reside in hazardous areas, Hoffman® provides its Purge and Pressurization offering. Purging an enclosure removes potential explosive gases. Pressurization maintains a higher pressure inside the cabinet that keeps outside explosive gas from entering.
Hoffman® ZONEX™ Enclosures For applications that must reside in hazardous areas, Hoffman® provides its ZONEX™ offering. Hoffman’s ZONEX offering is available in Stainless Steel Type 304 and 316 and Glass Reinforced Polyester. Screw cover versions are ideal for small simple terminations while the hinged offering provides for larger equipment protection. All ZONEX enclosures provide for either interior panels, DIN rails or both in mounting internal equipment.
Hoffman® Hazardous Location Enclosure Accessories Hoffman Hazardous Location Breather Drains prevent moisture build-up within hazardous approved enclosures in hazardous environments. With IECEx and ATEX approval, these drains are ideal for preventing the formation of condensation when an installation is subject to fluctuations in temperature in hazardous locations.
Explosion-Proof Rotary Sensors from POSITAL-FRABA The POSITAL-FRABA IXARC rotary sensors with explosion-proof housings are ATEX and IECEx-certified for use in environments with potentially dangerous levels of explosive gases or dust. These reliable and highly accurate devices are available in single- or multi-turn versions and can be ordered with the most commonly-used communications interfaces, including DeviceNet, CANopen and EtherNet/IP (forthcoming).
Powerit Solutions Spara Demand Manager Spara Hub™ and Spara Demand Manager technology link industrial facilities with the smart grid so customers can effortlessly control energy use for savings and sustainability. Spara DM™ uses sophisticated load prediction and control algorithms, built-in load-shedding intelligence, and data drawn from industrial equipment, electricity meters and utility transmissions to optimize facility energy use.
EtherNet/IP to Allen-Bradley Remote I/O or DH+ Gateway AN-X2-AB-DHRIO The ProSoft Technology AN-X gateways are powerful migration tools designed to allow Allen-Bradley ControlLogix PACs to control Legacy I/O platforms such as Remote I/O, DH+, Modicon S908, Texas Instruments 505, and GE Genius. The AN-X gateways also allow classic Allen-Bradley PanelView terminals and Allen-Bradley drives on remote I/O to be upgraded to a new PanelView Plus 6 or PowerFlex drive on EtherNet/IP.
802.11abgn Fast Industrial Hotspot RLX2-IHNF The 802.11abgn Fast Industrial Hotspot is an advanced, high-speed wireless Ethernet solution designed for critical manufacturing and process control systems. It offers a broad range of industrial wireless capabilities, including unique features such as Fast Roaming and advanced packet handling, ideal for highspeed material handling and manufacturing systems.
Modbus and Modbus TCP/IP for CompactLogix L3s & L2s, MVI69E/L-MBS & MVI69E/L-MBTCP ProSoft Technology announces scalable solutions for Allen-Bradley CompactLogix users who need connectivity to Modbus Serial and Modbus TCP/IP solutions. These modules enable CompactLogix controllers to communicate to devices using the Modbus and Modbus TCP/IP protocols.
Modbus Serial Module for CompactLogix L1s and Point I/O Adapters ILX34-MBS232, ILX34-MBS485 If you need in-chassis Modbus Serial connectivity for your Allen-Bradley CompactLogix 5370 L1 controller or distributed Point I/O system, ProSoft Technology has the solution with our ILX34-MBS232/485 modules. The modules can be configured as a Modbus Master or Slave and communicate via RS232, RS422 or RS485.
Spectrum Controls 1734 2-Channel Point HART Output The release of our two-channel analog output module with HART protocol for the Allen-Bradley 1734 POINT I/O™ platform, along with Spectrum Controls' previously released Analog+HART and Universal input modules for POINT I/O, provide powerful new functionality to OEMs, solution providers and end users, especially in distributed I/O and small to mid-range process applications.
Spectrum Controls 2080 4-Channel Thermistor Input Plug-In Module The 2080 Thermistor module is your low cost solution for temperature measurement that can provide fully linearized temperature measurements or a wide range of resistance inputs. Compatible with Allen-Bradley Micro830 and Micro850 controllers, the new 2080sc-NTC module is easily configured using your existing CCW programming software.
Spectrum Controls WebPort: New Release Version 1.4 Avoid expensive, time-consuming site visits. Extend your service model by proactively tracking your critical data. WebPort increases uptime and improves efficiency through remote access and active monitoring. As the proven solution for Rockwell Automation Virtual Support Engineer, WebPort is a complete remote access solution with unmatched ease-of-use, end-to-end connectivity, data access and event notifications.
Spectrum Controls New InView EtherNet/IP™ Comms Module Whether it’s process alarming, safety messages, inventory data or congratulating the team, InView delivers the right information at the right time to the right place.
Tolomatic’s ERD Series Electric Rod-style Actuators Tolomatic’s ERD electric cylinders are now available in six models with forces up to 4,500 lbf (20.01 kN) and a variety of ball screw and roller screw lead options. This expanded force range can handle applications for replacing pneumatic and hydraulic cylinders. ERD electric cylinders are available in 300series stainless steel with IP67 or IP69K options. Two new sizes (ERD25 and ERD30) employ a hygienic USDA approved design.
MLX100 Robot Gateway Yaskawa Motoman Robotics Yaskawa Motoman Robotics presents the most innovative way to program robots with full functionality using the familiar Allen-Bradley PLC/PAC interface. The MLX100 Robot Gateway™ module plugs into the Allen-Bradley ControlLogix chassis and communicates with the processor on the back plane. The gateway module is packed with the motion planner and robot kinematics.
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
