User manual

94 Publication ENET-UM001I-EN-P - January 2010
Chapter 7 Interlocking and Data Transfer Between Controllers
Logix5000 Controller Combinations
Make sure to:
• set the IP addresses and other network parameters for each
EtherNet/IP communication module
.
• connect all wiring and cabling.
• configure the communication driver (such as AB-ETHIP-1) for the
programm
ing workstation
Choosing a Communication Module
Controllers Communication Modules
1756 ControlLogix 1756-ENBT, 1756-EN2T, 1756-EN2TR,
1756-EN2TXT,
or 1756-EN2F communication
module
1768 CompactLogix 1768-ENBT communication module
1769-L23E-QB1B, 1769-L23E-QBFC1B,
1769-L32E and 1769-L35E CompactLogix
A built-in EtherNet/IP port
1794 FlexLogix 1788-ENBT EtherNet/IP communication
card
PowerFlex 700S with DriveLogix controller 1788-ENBT EtherNet/IP communication
card
IMPORTANT
If you are sharing tags between ControlLogix controllers and
the controllers are sharing only tags, not sending messages, set
the communication format of the 1756-ENBT, 1756-EN2F,
1756-EN2T, or 1756-EN2TXT module to None.