User manual

Publication ENET-UM001I-EN-P - January 2010 81
Control I/O Chapter 6
3. From the Major Revision pull-down menu, choose the major revision of
the I/O module you want to add and click OK.
The Module Properties dialog box appears.
4. In the Name field, type the na
me of your I/O module.
5. In the Slot field, type the slot number i
n which your I/O module will
reside.
6. From the Comm Format pull-down menu, choose a communication
for
mat.
For more information on the selection of communication
formats, see
Set the Requested Packet Interval (RPI) on
page 88 .
7. Click OK to see the rest of the Module Properties dialog boxs.
8. Configure the module as necessary.
9. Click Finish.