User manual

72 Publication ENET-UM001I-EN-P - January 2010
Chapter 5 Configure a Supervisor on a Device-level Ring Network
2. Browse to the DLR network that you are setting up.
3. Access the supervisor-capable node’s properties.
a.
Right-click the node.
b. Choose Module Configuration.
The General tab appears with information about the module that is not
configur
able
.
TIP
If you do not have the Electronic Data Sheet (EDS) file installed
on the module configured to be the ring supervisor, it will
appear with a question mark (?). To obtain and use the EDS file:
• right-click the module and choose to upload the EDS file from the
device.
or
• download the EDS file from:
http://www.rockwellautomation.com/resources/eds/
a
b