User manual

34 Publication ENET-UM001I-EN-P - January 2010
Chapter 2 Configure a Workstation to Operate on an EtherNet/IP Network
Configure the Ethernet
Communication Driver in
RSLinx Software
To configure the Ethernet communication driver, perform this procedure.
1. In RSLinx software, from the Communications pull-down menu,
c
hoose Configure Drivers.
The Configure Drivers dialog box appears.
2. F
rom Available Driver Types pull-down menu, choose EtherNet/IP
Dri
ver or Ethernet devices and click Add New.
The Add New RSLinx Driver dialog box appears.
3. Type a name for the new driver and click OK.