User manual

Publication ENET-UM001I-EN-P - January 2010 205
Status Indicators Appendix A
22-COMM-E Module
Status Indicators
The 22-COMM-E module has four status indicators.
22-COMM-E Status Indicators
PORT - DPI Connection Status
MOD - Adapter Status
NET A - EtherNet/IP Connection Status
NET B - EtherNet/IP Transmit Status
Module Status Indicator
Indicator Status Description
PORT Off The adapter is not powered or is not properly connected to the drive.
Follow the corrective action below.
Flashing Red In Single mode, the adapter is not receiving communication from the drive.
In Multi-Drive mode, the adapter is not receiving communication from a drive,
or a drive is not an Allen-Bradley drive.
Follow the corrective action below.
Flashing Green The adapter is establishing communication with the drive. No action required.
This status indicator will turn solid green or flashing red.
Solid Green The adapter is properly connected and is c
ommunicating with the drive. No
action required.
Orange In Single mode, the drive is not an Allen-Bradley drive. Use an Allen-Bradley
PowerFlex 40 drive.
MOD Off The adapter is not powered or is not properly connected to
the drive. Follow the
corrective action below.
Flashing Red The adapter has failed the firmware test. Follow the corrective action below.
Solid Red The adapter has failed the hardware test. Follow the corrective action below.
Flashing Green The adapter is operational, but is not transferring I/O data. Follow the
corrective action below.
Solid Green The adapter is operational and transferring I/O data. F
ollow the corrective
action below. No action is required.