User manual

Publication ENET-UM001I-EN-P - January 2010 199
Status Indicators Appendix A
1794-AENT EtherNet/IP
FLEX I/O Adapter Status
Indicators
The 1794-AENT EtherNet/IP FLEX I/O adapter has several status
indicators.
1794-AENT EtherNet/IP Flex I/O Adapter Status Indicators
IMPORTANT
The 1794-AENT adapter does not display any scrolling
messages.
Module Status
Network Status
Link Status
Module Status
Indicator
Network Status
Indicator
Link Status Indicator
Module Status Indicator
Indicator Status Description
Module
Status
Off The module does not have 24V DC power. Make sure power is being supplied
to the m
odule.
Flashing green The module is not configured. Configure the module.
Green The module is operating correctly. No action is required.
Flashing red A recoverable fault has been detected. Verify that the module is configured
correctly.
Red An u
nrecoverable fault has been detected.
Follow the corrective action below.
Flashing red/green The module is performing a self test while the module is being started. No
action is required.