User manual

Publication ENET-UM001I-EN-P - January 2010 15
EtherNet/IP Overview Chapter 1
1756-ENBT Module
The 1756-ENBT module operates either as an interface for a ControlLogix
controller to communicate with other devices over an EtherNet/IP network
or as an adapter for 1756 I/O modules on an EtherNet/IP network. This
module supports:
• control of I/O.
• communication via produced/consumed tags and MSG instructions.
• communication with HMI.
• configuration and programming, suc
h
as uploading and downloading.
• an adapter for 1756 I/O modules.
• a web server to provide diagnostic and status inform
ation.
Additional Resources
1756-EN2F, 1756-EN2T,
1756-EN2TR, and
1756-EN2TXT Modules
The following modules perform the same functions as the 1756-ENBT
module but with twice the capacity for demanding applications.
• 1756-EN2F ControlLogix EtherNet/IP fiber module
• 1756-EN2T ControlLogix EtherNet/IP bridge module
• 1756-EN2TR ControlLogix EtherNet/IP 2-port module
• 1756-EN2TXT ControlLogix-XT EtherNet/IP module
All modules support:
• control of I/O.
• communication via produced/consumed tags and MSG instructions.
• communication with HMI.
• configuration and programming, suc
h
as uploading and downloading.
• an adapter for 1756 I/O modules.
• USB serial communication, ena
bling a laptop or workstation to access
and program a Logix5000 controller. For more information, see the
chapter USB Port Connection.
• a web server to provide diagnostic and status inform
ation.
• rotary switches for quick IP address configuration.
Resource Description
1756-ENBT ControlLogix EtherNet/IP Bridge Module
Installation Instructions, publication
1756-IN019
Details how to install the module and provides technical specifications.
1756-ENBT ControlLogix Redundancy System Revision 15
User Manual, publication
1756-UM523
Details how to use and maintain a ControlLogix redundancy system.
1756-EN2T