User manual

134 Publication ENET-UM001I-EN-P - January 2010
Chapter 9 Communicate with PanelView Terminals
4. From the Major Revision pull-down menu, choose a revision and click
OK.
The New Module dialog box appears.
a. In the Name field, type the name of your new module.
b. From the Comm Format pull-down menu, choose a communication
format.
c
. In the Slot field, type the number of the slot where the ne
w module
will reside.
d. In Chassis Size field, type the chassis size.
e. In the IP Address field, type the IP address.
f. From the Electronic Keying pull-down menu, choose Disable Keying
and clic
k
OK.
5. In the Controller Organizer of RSLogix 5000 programming software,
righ
t-click the local EtherNet/IP communication module you just
added and select New Module.