User manual

128 Publication ENET-UM001I-EN-P - January 2010

Chapter 8 Send Email

3. Click the Communication tab.

4. In the Path field, type the path from the controller to the EtherNet/IP

module

The path starts with the controller initia

ting the MSG instruction. The

second number in the path represents the port from which the message

exits and the address of the next module in the path.

For example, if the EtherNet/IP module is in the same ch

assis as the

controller and is in slot 2, the path is: 1, 2.

5. If all the devices in the path are confi

gured in the initiating controller’s

I/O Configuration tree, click Browse to select the target module.

The software automatically fills in the path.

6. Click OK.

or more information on configuring the pat

h of an MSG instruction, see the

Logix5000 Controllers General Instru

ctions Reference Manual,

publication

1756-RM003