User manual

102 Publication ENET-UM001I-EN-P - January 2010
Chapter 7 Interlocking and Data Transfer Between Controllers
The New Module dialog box appears.
5. Configure your new module.
a. In the Name field, type the name of your module.
b. From the Comm Format pull-down menu, select a communication
format.
c
. In the Slot field, type the chassis slot number.
d. In the Chassis Size field, type the chassis size.
e. From the Revision pull-down menu, select a revision number.
f. In the IP Address field, type the module IP address.
g. From the Electronic Keying pull-down menu, select Disable Keying.
6. Click OK.
IMPORTANT
When consuming a tag, select None as the
Communication Format.