User manual

Publication 1734-UM011A-EN-P - February 2004
1734-AENT Adapter Web Pages A-9
IMPORTANT
If you set the thumbwheels on the 1734-AENT to the value 888
and then power cycle the module, the following will occur:
• the DHCP Enabled function will be enabled (set to True)
• the Ethernet link will be negotiated automatically (the Auto
Negotiate function will be set to True)
• the web server will be enabled (the Disabled Web Server
function will be disabled)
• the password for this page will reset to the factory default
(the word "password" is the factory default password)
Note the value of the switches before you enter the 888 value
because you will return the adapter to those values once this
process is complete.