User manual

Publication 1734-UM011A-EN-P - February 2004
Configure the 1734-AENT Adapter for Your EtherNet/IP Network 3-9
Save the Relation List
You can save the Relation List to use later. To save the Relation List perform
the following steps:
1. Select Save As... from the File menu.
You will see the following window.
2. Select the folder you want to Save in:
3. Enter a File name for the Relation List (e.g., “control system
configuration”) and click on Save.
You can leave the Save as type at the default setting: “Bootp Config
Files (*.bpc)”.