User manual

Publication 1734-UM011A-EN-P - February 2004
Configure the 1734-AENT Adapter for Your EtherNet/IP Network 3-5
The new configuration is:
A second network with Hosts D and E has been added. Gateway G2 connects
Network 2.1 with Network 2.2. Hosts D and E will use Gateway G2 to
communicate with hosts not on Network 2.2. Hosts B and C will use Gateway
G to communicate with hosts not on Network 2.1. When B is communicating
with D, G (the configured Gateway for B) will route the data from B to D
through G2.
128.1.0.1
128.2.64.1 128.2.64.2
128.2.64.3
128.1.0.2
A
B
C
G
Network 1
Network 2.1
128.2.128.1 128.2.128.2
128.2.128.3
D
E
G2
Network 2.2