User manual

Publication 1734-UM011A-EN-P - February 2004
Install the 1734-AENT Adapter 2-5
Mounting Dimensions
What’s Next?
The following chapter describes how to configure the adapter to communicate
on your EtherNet/IP network by providing an IP address, Gateway address,
and Subnet mask.
inches
(millimeters)
A = DIN rail
B = Secure DIN rail approximately every 200mm
A
B
5.25
(133.4)
2.16
(54.9)
3.0
(76.5)
1734-AENT
3.0H x 2.16W x 5.25D
(76.2H x 54.9W x 133.4D)
43520
1.44
(36.51)