User manual

Publication 1734-UM011A-EN-P - February 2004
1734-AENT Quick Start D-5
We are going to assume there is an analog input module 1734-IE2V,
which resides in slot 3.
3. Click on the configuration tag remote_POINT_IO:3:C.
From here you can set the entire module’s configuration, alarms, etc.
In this configuration window, you enter the values that would
correspond to the desired range. According to Appendix C of this user
manual, the range type default value for a 1734-IE2V module is 2, which
is equal to 0-10VDC.
4. Click on the configuration tag for the module in slot 4,
remote_POINT_IO:4:C.
5. Check the value in the tag remote_POINT_IO:4:C.Ch0RangeType.