User manual

Publication 1734-UM011D-EN-P - May 2011
POINT I/O Module and RSLogix 5000 Software Controller Tag Reference 107
1734-IT2
2 Channel Thermocouple Input, Isol.
Configuration Data Data Type Default
Value
Valid Data Values
Temperature Mode Channel 0 SINT 1 0=mV/Custom Scale
1=°C
2=°F
3=°K
4=°R
Cold Junction Enable Channel 0 SINT 1 0=Disabled
1=Enabled
Cold Junction Offset Channel 0 INT 0 0…7,000 (0.00…70.00)
Low Engineering Channel 1 INT 0 -32,768…32,767
High Engineering Channel 1 INT 7,000 -32,768…32,767
Alarm Disable Channel 1 SINT 0 0=Alarms Enabled
1=Alarms Disabled
Limit Alarm Latch Channel 1 SINT 0 0=No Latching
1=Alarms Latch
Notch Filter Channel 1 SINT 1 0=50 Hz
1=60 Hz
2=100 Hz
3=120 Hz
4=200 Hz
5=240 Hz
6=300 Hz
7=400 Hz
8=480 Hz
Sensor Type Channel 1 SINT 5 0=mV
1=B
2=C
3=E
4=J
5=K
6=N
7=R
8=S
9=T
Digital Filter Channel 1 INT 0 0…10,000 ms
Low Alarm Limit Channel 1 INT -32,768 -32,768…32,767
High Alarm Limit Channel 1 INT 32,767 -32,768…32,767
Low Low Alarm Limit Channel 1 INT -32,768 -32,768…32,767
High High Alarm Limit Channel 1 INT 32,767 -32,768…32,767