Specifications

Presence Sensing Safety Devices
MatGuard™ Mats
2-96
Visit our website: www.ab.com/catalogs
Publication S117-CA001A-EN-P
General 1-Principles
2-Safety Mats 3-Safety Switches 4-Operator
Interface
5-Logic
R
Product Selection⎯Configurable Mats
A
B
MatGuard safety mat and trim kit cat. nos. can be configured by selecting the appropriate codes from the tables below.
Mats: 440F M 13 23 A YNN
abcd
Trim Kit: 440F T 13 23
eab
a
"A" Dimension [mm (in.)]
Code Description
2 digit number
Length of the mat in millimetres/50
Must be in 50 (1.97) increments
Min. allowed 150 (03); Max. allowed 1000 (20)
The length of A must be equal to or shorter than B.
b
"B" Dimensions [mm (in.)]
Code Description
2 digit number
Length of the mat in millimetres/50
Must be in 50 (1.97) increments
Min. allowed 200 (04); Max. allowed 1800 (36)
The length of A must be equal to or shorter than B.
c
Cable Exit
Code Description
A Two 4.5 m (15 ft) 2-wire cables—exit out the A corners
B Two 4.5 m (15 ft) 2-wire cables—exit out the B corners
C
One 9.1 m (30 ft) 4-wire cable with M12 male connector
exits out of upper left corner
D
One 9.1 m (30 ft) 4-wire cable without connector exits out of
upper left corner
F
One 0.76 m (2.5 ft) 4-wire cable with M12 male connector
exits out of upper right corner
G
One 9.1 m (30 ft) 4-wire cable with M12 male connector
exits out of upper left corner for use with 898D Distribution
Box
H
One 9.1 m (30 ft) 5-wire cable with M12 male connector
exits out of upper left corner for use with ArmorBlock
Guard I/O
d
Color
Code Description
B Black
Y Yellow
e
Trim Options
Code Description
K Cable Channel Trim
T Standard Trim
Note: Order controller separately, see page 5-68 for selection
details.