Specifications

Presence Sensing Safety Devices
PAC Type 4 Safety Light Curtains
2-66
Visit our website: www.ab.com/catalogs
Publication S117-CA001A-EN-P
GuardShield Safe 4 PAC
General Principles
2-Opto-electronics
Safety Switches Operator
Interface
Logic Power
R
Cordsets—Transmitters and receivers both use 5-pin M12 cordsets
Note: Unshielded cordsets are most commonly used for safety light curtains, however, shielded cordsets are also offered to increase
immunity to electrical interference.
Cordsets Approximate Dimensions [mm (in.)]
Dimensions are not intended to be used for installation purposes.
Female Connector (Sensor End) Cable
Cat. No.Face View of Female Connector Style Pin/Wire Color Wire Rating Length [m (ft)]
5
4
3
1
2
Straight Female
1 Brown
2 White
3 Blue
4 Black
5 Grey
22 AWG
250V
4 A
2 (6.56)
889D-F5AC-2
5 (16.4)
889D-F5AC-5
10 (32.8) 889D-F5AC-10
15 (49.2) 889D-F5AC-15
20 (65.6)
889D-F5AC-20
30 (98.4) 889D-F5AC-30
Shielded Straight
Female
1 Brown
2 White
3 Blue
4 Black
5 Grey
22 AWG
22 AWG
300V
4 A
2 (6.56)
889D-F5EC-2
5 (16.4)
889D-F5EC-5
10 (32.8)
889D-F5EC-10
15 (49.2) 889D-F5EC-15
20 (65.6) 889D-F5EC-20
30 (98.4)
889D-F5EC-30
47 (1.85)
14
(0.56)
Straight Female
Accessories
Muting Sensors
Sensor Type Connection Location Type Cat. No.
Retroreflective Connected directly to muting module
Dark Switching
42GRU-9000-QD
Transmitted Beam
Receiver (connected directly to the muting
module)
42GRR-9000-QD1
Retroreflective Connected directly to muting module
42GRU-9000-QD1
Polarized Retroreflective Three inch standard reflector 92-39
Polarized Retroreflective Connected directly to muting module
42GRU-9200-QD1
Polarized Retroreflective Three inch standard reflector 92-39
Mechanical Limit Switch
Connected directly to muting module
(operating lever must be selected
separately)
802M-NX101
Muting lamp Two cat. nos. make this assembly.
855E-24TL7
855E-BVMC
1Use with 4-pin, DC Micro patchcord when connecting to muting module (5 m length shown). 1 m, 2 m, 3 m, and 5 m lengths
available.
889D-F4AC-5