Specifications

Presence Sensing Safety Devices
POC Type 4 Safety Light Curtains
2-37
Visit our website: www.ab.com/catalogs
Publication S117-CA001A-EN-P
GuardShield Micro 400
GeneralPrinciples
2-Opto-electronics
Safety SwitchesOperator
Interface
Logic
Power
R
Face View M12 Connector Face View RJ45 Connector Description Cat. No.
Pinning table:
------------------
1: blue
2: grey
3: green
4: white
5: black
6: pink
7: brown
8: yellow
Shield: Braid wires
1
2
3
4
5
6
7
8
Pinning table:
------------------
1: blue
2: grey
3: green
4: white
5: black
6: pink
7: brown
8: yellow
Shield: Braid wires
1
2
3
45
6
7
8
1 m patchcord, PVC jacket 445L-AC8RJ1
2 m patchcord, PVC jacket 445L-AC8RJ2
3 m patchcord, PVC jacket
445L-AC8RJ3
5 m patchcord, PVC jacket 445L-AC8RJ5
8 m patchcord, PVC jacket
445L-AC8RJ8
Patchcord [mm (in.)]
Description Cat. No.
Ribbon cable—for one MSR45E
440R-ACABL1
Ribbon cable—for two MSR45Es 440R-ACABL2
Ribbon cable—for three MSR45Es 440R-ACABL3
USB optical interface software configuration tool
used to configure the MSR42
445L-AF6150
Note: The configuration software can be downloaded at www.ab.com/safety.
Standard Micro 400 Patchcords—Required (Transmitters and receivers both use 8-pin M12 to RJ45 patchcords)
Ferrite
6.3 (0.25) dia.
17 (0.67)
150
(5.91)
32.5
(1.28)
Cable
The MSR41 or MSR42 can have up to three MSR45E safety relays inter-connected. Each module requires a ribbon cable connector to make
the interconnection. The table shows the cat. no. for each ribbon cable connector as well as the optical interface for the programming of the
MSR42. Programming of the MSR42 is only necessary for advanced operating modes or connection of additional devices.
Optional Safety Relay Interface (accessories for MSR41 or MSR42 Controllers)