Specifications

Presence Sensing Safety Devices
Safedge™ Profiles
2-114
Visit our website: www.ab.com/catalogs
Publication S117-CA001A-EN-P
General 1-Principles
2-Safety Edges 3-Safety Switches 4-Operator
Interface
5-Logic
R
Factory Assembled Examples
A
Type C112/A
Aluminum C Rail
V
Series Termination
6KΩ
C
Type 0110N
Oil Resistant Profile
1250 mm long
K
SET Cable Entrance
with 1m Cable
440F-ECAKV01250
This is a single oil resistant profile which is 1250 mm (49.2 in.) long.
The edge is terminated with a Series Termination. A 1 m (3.2 ft)
cable enters straight into the closing cap. The profile is mounted on
a standard aluminum C-rail.
F
Type 1214 Aluminum Rail
with Vertical Lip
D
LHT Cable Exit
5m
G
RHT - Right Hand Entrance
with 2m Cable
C
Type 0110N Oil Resistant Profile
1250mm long
440F-ECFGD01250
This is a single oil resistant profile which is 1250 mm (49.2 in.) long.
The edge is terminated with a 1 m (3.2 ft) cable. A 1 m cable enters
straight into the closing cap. The profile is mounted on an aluminum
C-rail with a vertical mounting lip. A control unit is not included. This
edge is intended to be used in series with another length of edge
which has a terminating resistor.
V
Series Termination
6KΩ
H
RHT- Right-Hand
Entrance
with 3m Cable
F
Type 1214 Aluminum Rail
with Vertical Lip
Note orientation of sealing
lip to cable entrance
D
Type 0510S Profile
with Sealing Lip
490mm long
440F-EDFHV00490
This single profile has a sealing lip and is 490 mm (19.2 in.) long.
The profile is terminated with a Series Termination. A 3 m (9.8 ft)
cable enters into the right hand side of the closing cap from a
plastic surface mounted controller. The profile is mounted on an
aluminum rail with a vertical lip for ease of mounting. The orientation
of the sealing lip to the vertical lip can be reversed by the user by
sliding the profile out of the C-rail, rotating the C-rail 180° and then
re-inserting the profile back into the C-rail.
G
Type 1215 Aluminum Rail
with Horizontal Lip
U
Parallel
Termination
15KW
C
LHT - Entrance
with 3m Cable
B
Type 0110R Profile
3560mm long
440F-EBGCU03560
This is a red-colored single profile which is 3560 mm (140.15 in.)
long. This profile is part of a parallel profile system, for ease of
mounting, as it is terminated with a Parallel Termination. A 3 m
(9.8 ft) cable enters into the left side of the closing cap. The profile
is mounted on an aluminum C-rail with a horizontal lip for ease of
mounting. The horizontal lip can be reversed by the user by sliding
the profile out of the C-rail, rotating the C-rail and then re-inserting
the profile back into the C-rail. A separate Cat. No. must be entered
for the other profile.