Specifications
R
Presence Sensing Safety Devices
Safedge™ Profiles
2-111
Visit our website: www.ab.com/catalogs
Publication S117-CA001A-EN-P
General1-Principles2-Safety Edges3-Safety Switches4-Operator
Interface
5-Logic
Description Product Selection Criteria Cat. No.
60° Corner Connector When using profile 440F-E0110N
440F-A0071N60 1
30° Corner Connector When using profile 440F-E0110N
440F-A24007130 1
Connector and Cable
Use only on Mini Profile—1 m (3.3 ft)
440F-A1181
Use only on Mini Profile—3 m (9.8 ft)
440F-A1183
Use only on Mini Profile—5 m (16 ft)
440F-A1185
Terminator
Use only on Mini Profile—8 kΩ (yellow) resistor for
series termination
440F-A1186
Closing Cap Use only on Mini Profile—Closing Cap material: EPDM 440F-A1318
Cyanocrylate Adhesive
Use Loctite 401 for dry applications.
Use Loctite 380E for wet applications.
NA
Shears Use to cut profiles. 440F-A3084
Connection Box
Polycarbonate housing 53 x 53 x 35 mm (2.09 x 2.09 x
1.38 in.) complete with two pole terminal and trumpet
type screw on connector with strain and relief clamp.
For use with coiled cable.
440F-A0116
Coiled Connection Cable
2.5 m (8.2 ft) (extended) of flexible coiled cable. Shelf
length is 889 mm (35 in.) long. OD of coil is 22 mm
(0.86 in.) and OD of cable is 5 mm (0.20 in.).
440F-A2450
3.5 m (11.5 ft) (extended) of flexible coiled cable. Shelf
length is 1270 mm (50 in.) long. OD of coil is 22 mm
(0.86 in.) and OD of cable is 5 mm (0.20 in.).
440F-A2700
Two rubber strips
When using profile 440F-E0110N shelf length is 175 x
10 x 0.7 mm (6.89 x 0.39 x 0.03 in.).
440F-A0005
1 Includes two rubber strips (440F-A0005) when using profile 440F-E0110N.
Control Unit
Connection Box
Coiled
Cable
Closing
Cap
Cable
Connector
Connector
with Resistor
Closing
Cap
“C” Rail
Connection Box
Example application of profile using coiled cable. The coiled cable
can not be directly connected to the profile due to the weight of the
cable. The proper use of the coiled cable is to connect the coiled
cable to the profile through the connection box. The coiled cable
should be secured to both the moving and stationary objects so as
to prevent straining of the terminal connections.