Specifications
Presence Sensing Safety Devices
Safedge™ Profiles
2-110
Visit our website: www.ab.com/catalogs
Publication S117-CA001A-EN-P
General 1-Principles
2-Safety Edges 3-Safety Switches 4-Operator
Interface
5-Logic
R
Code Approx. Dimension [mm (in.)] Description Cat. No.
J
13
(0.51)
45 (1.77)
Aluminium; Suitable for Rubber Boot Only.
Length: 2 m (6.5 ft)
Weight: 667 g/m (0.448 lbs/ft)
440F-R2151
NA
10
(0.4)
45 (1.77)
Aluminium End Plate for C-Rail Option J; 2 Plates; 4 Screws,
flat head Philips, 10mm, #6
Weight: 7g (0.01 lbs)
440F-R2152
Product Selection—Component Parts
Description Product Selection Criteria Cat. No.
Connector and Cable (diameter = 5 mm
(0.20 in.)
1 m (3.2 ft)
440F-A1301
2 m (6.56 ft)
440F-A1302
5 m (16.4 ft)
440F-A1305
10 m (32.8 ft)
440F-A1306
15 m (49.2 ft)
440F-A1307
Terminator
6 kΩ (yellow) resistor for series termination
440F-A1308
15 kΩ (blue) for parallel termination
440F-A1309
Closing Cap for profile codes (A, B, C, D, J)
Closing Cap material: EPDM
440F-A1302S
Closing Cap material: NRB
440F-A1302N
Closing Cap for profile codes (E, F, G, H, K)
Used to close profiles 440F-E0310S and
440F-E1610S.
440F-A1303S
Used to close profile 440F-E1610N.
440F-A1303N
Axial Connector
With this connector you can directly connect
two profiles. Suitable for 440F-E0110S
profiles.
440F-A0061S
With this connector you can directly connect
two profiles. Suitable for 440F-E0110R
profiles.
440F-A0061N
Straight Pin Connector
Kit contains one pair of pins suitable for one
joint.
440F-A0004
90° Corner Connector
For use with profile 440F-E0110S
440F-A0071S
For use with profile 440F-E0110R
440F-A007IS
For use with profile 440F-E0110N
440F-A007IN
For use with profile 440F-E0310S
440F-A0073S
For use with profile 440F-E1610S
440F-A0074S
For use with profile 440F-E1610N
440F-A0074N
90° Corner Connector (vertical)
For use with profile 440F-E0110N
440F-A0072N
For use with profile 440F-E0110S or 440F-
E0110R
440F-A0072S
For use with profile 440F-E1610N
440F-A0075N
For use with profile 440F-E1610S
440F-A0075S
For use with profile 440F-E0310S
440F-A0076S
45° Corner Connector For use with profile 440F-E0110N
440F-A0071N45 1
1
Includes two rubber strips (440F-A0005) when using profile 440F-E0110N.