User Guide

Publication DNET-UM004A-EN-P - March 2004
Connect Each Device to the Network 5-9
Turn Off BootP/DHCP
If you leave BootP/DHCP enabled for the device, its IP configuration
lasts only until the next power cycle. After the next power up, the
device sends out a new request for an IP address from a BootP/DHCP
server.
To permanently assign the configuration to the device, disable
BootP/DHCP.
1. Select the device.
2. Disable BootP/DHCP.
3. Check that the command was successful.