User Guide

1 Publication DNET-UM004A-EN-P - March 2004
Chapter 5
Connect Each Device to the Network
Using This Chapter
This chapter describes how to set the address of a device so it can
communicate on your DeviceNet network.
Before You Begin
At this point, you should have a list of the devices that you are putting
on your network and an address for each of them.
For example:
For this information: See page:
Before You Begin 5-1
Set the Address of a Device 5-2
Set an Address with Software 5-3
Procedures for Specific Devices 5-4
Make Sure Your Devices Are on the Network 5-11
Device Address Input Size of
Device
(bytes)
Input Memory
in Scanner
(DINTs)
Output Size
of Device
(bytes)
Output Memory
in Scanner
(DINTs)
scanner 0 n/a n/a n/a n/a
PanelView terminal 3 128 32 128 32
<empty> 22
I/O adapter w/ modules 5 9 3 5 2
<empty> 22
drive 74141
<empty> 22
photoeye 9 1 1 0 0
computer interface 62 n/a n/a n/a n/a
63
Total
43 41