User manual

Rockwell Automation Publication 1756-UM001O-EN-P - October 2014 51
Start Using the Controller Chapter 3
2. From the Available Driver Types pull-down menu, choose the
RS-232 DF1 device driver.
3. Click Add New.
The Add New RSLinx Driver dialog box appears.
4. Type the driver name and click OK.
5. Specify the serial port settings.
a. From the Comm Port pull-down menu, choose the serial port on the
workstation to which the cable is connected.
b. From the Device pull-down menu, choose Logix 5550/CompactLogix.
c. Click Auto-Configure.
6. If the auto configuration is successful, click OK.