User manual

192 Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Appendix A Troubleshoot the Module
#000E Attribute Not Settable
#000F Permission Denied
#0010 Device State Conflict
#0011 Reply Too Large
#0012 Fragment Primitive
#0013 Insufficient Command Data
#0014 Attribute Not Supported
#0015 Data Too Large
#0100 Connection In Use
#0103 Transport Not Supported
#0106 Ownership Conflict
#0107 Connection Not Found
#0108 Invalid Connection Type
#0109 Invalid Connection Size
#0110 Module Not Configured
#0111 RPI Out of Range
#0113 Out of Connections
#0114 Wrong Module
#0115 Wrong Device Type
#0116 Wrong Revision
#0117 Invalid Connection Point
#0118 Invalid Configuration Format
#0119 Module Not Owned
#011A Out of Connection Resources
#0203 Connection Timeout
#0204 Unconnected Message Timeout
#0205 Invalid Parameter
#0206 Message Too Large
#0301 No Buffer Memory
#0302 Bandwidth Not Available
#0303 No Bridge Available
#0304 ControlNet Schedule Error
#0305 Signature Mismatch
#0306 CCM Not Available
#0311 Invalid Port
#0312 Invalid Link Address
#0315 Invalid Segment Type
#0317 Connection Not Scheduled
#0318 Invalid Link Address
Table 51 - I/O Fault Messages (Continued)
Code Message