User manual

Rockwell Automation Publication 1756-UM001O-EN-P - October 2014 133
I/O Modules Chapter 8
• DeviceNet
Figure 23 - ControlLogix System with Distributed I/O Example
Add Distributed I/O to the I/O Configuration
If you are adding distributed I/O, add the I/O modules to the communication
adapter of the I/O. To add distributed I/O to the I/O Configuration folder for
the ControlLogix controller, complete these steps.
1. Add a communication module to the backplane that contains the
controller.
ControlLogix Controller Chassis
FLEX I/O
ControlNet
POINT I/O
EtherNet/IP