Specifications

Allen-Bradley ControlLogix Ethernet Driver Help

Error Descriptions

Error messages are classified according to error sub types. For more information, select a link from the list

below.

Address Validation Errors

Communication Errors

Device-Specific Error Messages

ControlLogix-Specific Error Messages

ENI/DH+/ControlNet Gateway Error Messages

Automatic Tag Database Generation Errors

Address Validation Errors

The following is a list of sub type error topics. Click on a link for more information about that specific error

message.

Address Validation

Address <address> is out of range for the specified device or register.

Array size is out of range for address <address>.

Array support is not available for the specified address: <address>.

Data type <type> is not valid for device address <address>.

Device address <address> contains a syntax error.

Device address <address> is not supported by model <model name>.

Device address <address> is read only.

Memory could not be allocated for tag with address <address> on device <device name>.

Missing address.

Address <address> is out of range for the specified device or register.

Error Type:

Warning

Possible Cause:

A tag address that has been specified statically references a location that is beyond the range of the device's

supported locations.

Solution:

Verify that the address is correct; if it is not, re-enter it in the client application.

Note:

For valid bit and array element ranges, refer to Address Formats.

Array size is out of range for address <address>.

Error Type:

Warning

Possible Cause:

A tag address that has been specified statically is requesting an array size that is too large.

Solution:

1. Specify a smaller value for the array.

2. Specify a different starting point by re-entering the address in the client application.

Note:

For valid array size ranges, refer to Address Formats.

Array support is not available for the specified address: <address>.

Error Type:

Warning