Specifications

Allen-Bradley ControlLogix Ethernet Driver Help

Note: This is the control set for comparisons.

17. In the server, set the Protocol Mode to Logical Non-Blocking.

18. Connect to the server using Quick Client. Then, click Tools | Test Mode and enable test mode.

Note: Data reading begins. When the test interval expires, all tags are deactivated and the driver ceases

statistics gathering. The results can then be viewed.

19. Disconnect the Quick Client from the server and then shutdown the server.

20. Next, re-launch the server and then search its Event Log for statistics. The image below displays the

second trial utilizing Logical Non-Blocking for the device.

Note: The image below displays the second trial utilizing Logical Non-Blocking for the channel and driver.