Specifications

Allen-Bradley ControlLogix Ethernet Driver Help

5. Once the project is loaded, remove all groups except those containing tags of interest. Statistics and

System tags, for example, are not needed.

Note: For small projects, set the Group Update Rate to 0-10 ms. For large projects, set the rate to 10-

50 ms.

6. Next, click Tools | Test Mode.

7. Then, select Test 8. Activate items on start. Deactivate items on stop and then set a test interval.

Note: Since this project is fairly small, the interval has been set to 2 minutes. For larger projects, the

interval should be increased to get a more accurate reading.