Specifications

Allen-Bradley ControlLogix Ethernet Driver Help

1 Port ID Port to backplane. Decimal 1

Optional

Routing Path

Multiple Link,

port pairs

Specifies a way out of the Ethernet/IP interface module

and must equal 1 (port to the backplane).

Decimal *

CPUSlot Link Address Slot number of the CPU module that contains the serial

port used for communications.

Decimal 0-255

Serial Port

Channel

Serial port channel to use. Alpha A and

Station ID DF1 station ID of target PLC in Decimal Format.** Decimal 0-255

*For more information, refer to Connection Path Specification.

Example

123.123.123.123,1,0.A.3

This equates to an Ethernet/IP of 123.123.123.123. The CPU card resides in slot 0: use Channel A (serial port)

and addressing target station ID 3 (dec).

Note 1: For information on supplementing a Device ID with a routing path to a remote serial node, refer to

Communications Routing.

Note 2: For more information on communications parameters, refer to Logix Communications Parameters.

Note 3: When configuring the Device ID, users should verify that the device can be detected using the same

route through RSLinx.

MicroLogix 1100 Setup

MicroLogix 1100 Device ID

The Device ID specifies the IP address of the MicroLogix 1100. Device IDs are specified as the following:

Designator Designator Type Description Formats Range

IP/Host Name N/A IP Address or host name. Decimal 0-255

Example

123.123.123.123

This equates to an IP of 123.123.123.123.

Note: For more information on communications parameters, refer to ENI DF1/DH+/ControlNet Gateway

Communications Parameters.