User manual

Configuring the Scanner3–14

Publication 2755-6.2

Transmit Code ID Character

The code ID identifies a scanned bar code symbol’s code type.

If enabled, the code ID is sent after the prefix and before the bar code

data. The code ID codes are:

A = UPC-A, UPC-E, or EAN 13 F = Interleaved 2 of 5

B = Code 39 G = Discrete 2 of 5

C = Codabar J = MSI Plessey

D = Code 128 K = EAN 128

E = Code 93

Transmit AIM ID Character

When enabled, the AIM code identifier is sent after the prefix and before

the bar code data. The identifier is a three character prefix. Refer to the

following:

Each AIM Code Identifier contains the 3-character string ]cm where:

]

= Flag Character (ASCII 93)

= Code Character (see table below)

= Modifier (see table on next pages)

Code Character /

Generic Identifier

Code Type

A / ]A0 Code 39

C / ]C0 Code 128

E / ]E0 UPC/EAN

I / ]I0 Interleaved 2 of 5