User manual

Configuring the Scanner 3–3
Publication 2755-6.2
Programming Guide ➀
Page Reference
Item Default Setting
For AdaptaScan
Cable
For All Other
Cables
Decode UPC / EAN
Supplemental
Disabled 2-9 1-9
UPC-A Preamble System Character 2-10 1-10
UPC-E Preamble System Character 2-10 1-10
UPC/EAN Security Level 0 2-11 1-11
CLSI Editing Disabled 2-12 1-12
NOTIS Editing Disabled 2-12 1-12
Codabar Decode Redundancy Disabled 2-12 1-12
Transmit Code 39 Check Digit Disabled 2-13 1-13
Buffer Code 39 Disabled 2-13 1-13
Code 39 Full ASCII Disabled 2-13 1-13
MSI Plessey Check Digit One 2-14 1-14
MSI Plessey 2 Check Digit
Algorithm
Mod 10 - Mod 10 2-14 1-14
Convert Interleaved 2 of 5 (14
digit) to EAN 13
Disabled 2-15 1-15
Interleaved 2 of 5 Code Length 14 2-15 1-15
Discrete 2 of 5 Code Length 12 2-15 1-15
Prefix None 2-17 1-17
Suffix None 2-17 1-17
Data Transmission Format
➁
2-19 1-19
Transmit No-Read Message Disabled 2-19 1-20
Transmit Code ID Character Disabled 2-20 1-20
Transmit AIm ID Character Disabled 2-20 1-21
Audible Response Enabled 2-21 1-21
Power Mode
➂
2-21 1-21
Laser On Timeout 3 Seconds 2-22 1-22
Hands-Free Operation Timeout 60 minutes 2-24 1-23
➀ Bar Code Programming Guide for Decoded Scanners (Publication No. 2755-6.5)
➁ for AdaptaScan Cable = Suffix Only, for Synapse Cable = Data As Is
➂ for AdaptaScan Cable = Low Power, for Synapse Cable = Continuous