User manual

Connecting and Operating Scanner 2-5
Publication 2755-6.2
Scanner Emulation Synapse Cable Connections
Use the scanner emulation Synapse cable to provide undecoded output to
a scanner input port of a bar code decoder (cable has female 9-pin DB
connector). The following scanner emulation cable is available.
Catalog No. 2755-HFC-SA1-01
A separate power supply provides power to the scanner. The power
supply plugs into the scanner emulation Synapse cable.
To Bar Code Decoder
Power Supply
Scanner Cable
Scanner Emulation Synapse Cable
(2755-HFC-SA1-01)
Scanner
Note: The power supply
should be connected last.
!
ATTENTION: Do not install the scanner emulation
Synapse cable with power applied to either the Synapse
cable or decoder. Failure to follow this caution may result
in damage to the scanner, Synapse cable, or decoder.