User manual

Connecting and Operating Scanner2-2
Publication 2755-6.2
Overview
The scanner may be connected to a variety of host devices through an
interface cable. The communication parameters for the cables are
configured by scanning bar codes. There are four types of cables:
• Scanner Emulator Synapse cable
• RS-232 Synapse cable
• Keyboard Wedge Synapse cable
• AdaptaScan Pass Through cable
Note: The AdaptaScan Pass Through cable (Catalog No.
2755-HDC-GA2-08) provides a physical link between the scanner’s
output connector and a user supplied custom cable connected to an
AdaptaScan Bar Code Reader’s RS-232 and power terminal blocks.
All configuration bar codes are in the Bar Code Programming Guide for
Decoded Hand-Held Scanners (Publication No. 2755-6.5).