User manual

A–B
4
Chapter
4–1
Setup Instructions
This chapter provides setup instructions including:
• Connecting Scanner to Host
• Scanner Configuration Guidelines
• Scanner Default Settings
• Resetting Factory Defaults
Before configuring parameters of the scanner, you
must connect the scanner to the host device using the
appropriate interface cable and power supply. Figure
4.1 shows the connections.
Figure 4.1
System Connections
Power Source
Power Supply
Receptacle
Power Supply
Host
Device
Scanner
AC
RS-232 Serial Port
D-Type
Connector
Catalog No. 2755-PW1
Cat. No. 2755-NCR1 or -NCR2
Cat. No. 2755-G3-D or
2755-G6-D
Chapter
Objectives
Connectin
g
Scanner to Host