User manual

Programming
5-36
Feature Select Group (continued)
[
Sli
p
Com
p
Add
er]
Parameter # 148 Factory Default None
[
Sli
p
Com
p
Add
er]
Parameter Type Read Only Minimum 0.00 Hz
Displays the frequency added to the drive output due to the
slip compensation feature. See [Rated Slip] for additional
information.
Units 0.01 Hz Maximum 5.00 Hz
[IR Comp %]
Parameter #
ara eter T pe
147
ea ri e
Factory Default
M
See Table
0
0.37 kW
(0.5 HP)
0.55 kW
(0.75 HP)
0.75 kW
(1 HP)
1.5 kW
(2 HP)
2.2 kW
(3 HP)
4.0 kW
(5 HP)
Parameter Type
R
ea
d & W
ri
t
e
Minimum 0%
230V 45% 45% 45% 45% 45% N/A
A voltage is added to the output based on torque
rre . a i i a 31 ma im m i a e
Units 1% Maximum 150%
460V 75% 75% 75% 60% 50% 50%
A volt
a
g
e
i
s
a
dd
e
d to th
e
output b
a
s
e
d on to
rq
u
e
current. An additional 31 volts (maximum) is added
to 460 volt units to compensate for stator
resistance. 15.5 volts is added for 230 volt units. If
the drive trips on an Overload fault (F7), or has
trouble accelerating to commanded speed, this
value should be reduced. A setting of 0% disables
this function.
Uni
t
s
1
%
Max
imum
150
%