User manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Connecting the Scanner
- Overview
- Scanner Cable Connection
- Scanner Cable to Synapse Cable Connection
- Scanner Emulation Synapse Cable Connections
- RS-232 Synapse Cable Connections
- Keyboard Wedge Synapse Cable Connections
- Scanner to Enhanced Decoder Scanner Port Connection
- Scanner to Enhanced Decoder Aux Port Connection
- Scanner to Flexible Interface (RB) Module Connection
- Scanner to PLC Connection
- Scanner to SLC Connection
- 3 - Operating the Scanner
- 4 - Configuring the Scanner
- 5 - Communication Setup (Synapse Cable)
- 6 - Troubleshooting and Maintenance
- A - Specifications
- B - Scanner Pinout Collections
- C - ASCII Chart
- D - AIM Code Identifiers
- E - Advanced Data Formatting
- F - European Union Directives
- Glossary
- Index
- Back Cover
Communication Setup (Synapse Cable) 5–9
Publication 2755-6.4
Setting IBM PC Keyboard Wedge Synapse Cable Options
This section defines the communication options available when the
scanner is connected to one of these IBM AT/XT or PS/2 Keyboard
Wedge Synapse cables:
• Catalog No. 2755-HFC-SP1-01
• Catalog No. 2755-HFC-SP2-01
Defaults
Settings
Scan the Set PC Wedge Synapse Cable Defaults bar code to set the
synapse cable to default settings. The following table lists the
default settings.
Parameter Default Setting
Refer to
Description
on Page:
Programming
Guide ➀
Page Reference
Host
IBM PC/AT
IBM PS/2-50, 55SX, 60, 70,
80
5–10 3-2
Country North American 5–10 3-3
Bar Codes with
Unknown Labels
Send Bar Codes With
Unknown Characters
5–11 3-4
Intercharacter Delay 5 milliseconds 5–11 3-4
Parameter Set Parameter Set 1 5–12 3-5
➀ Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)