User manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Connecting the Scanner
- Overview
- Scanner Cable Connection
- Scanner Cable to Synapse Cable Connection
- Scanner Emulation Synapse Cable Connections
- RS-232 Synapse Cable Connections
- Keyboard Wedge Synapse Cable Connections
- Scanner to Enhanced Decoder Scanner Port Connection
- Scanner to Enhanced Decoder Aux Port Connection
- Scanner to Flexible Interface (RB) Module Connection
- Scanner to PLC Connection
- Scanner to SLC Connection
- 3 - Operating the Scanner
- 4 - Configuring the Scanner
- 5 - Communication Setup (Synapse Cable)
- 6 - Troubleshooting and Maintenance
- A - Specifications
- B - Scanner Pinout Collections
- C - ASCII Chart
- D - AIM Code Identifiers
- E - Advanced Data Formatting
- F - European Union Directives
- Glossary
- Index
- Back Cover
4–4 Configuring the Scanner
Publication 2755-6.4
Set Defaults
Scan the Set Defaults bar code to return all parameters to the default
values listed in Table 4.A.
Select Symbologies
Scan the bar code labels for the symbologies you want the scanner to
decode. Only enable the symbologies you expect to read. The
scanner automatically discriminates between all of the symbologies
below. The only exception is that the scanner cannot discriminate
between Code 39 and Code 39 Full ASCII.
• UPC Versions A and E (EAN 8 and 13)
• Code 39 (Code 39 Full ASCII)
• Codabar
• UCC/EAN 128
• Interleaved 2 of 5
• Discrete 2 of 5
• PDF417
By default, all symbologies are enabled except Interleaved 2 of 5 and
Codabar.
To enable a symbology, scan the Enable bar code for the symbology.
To disable a symbology, scan the Disable bar code. You can enable
all code types (only Code 39 Full ASCII is disabled).