User manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Connecting the Scanner
- Overview
- Scanner Cable Connection
- Scanner Cable to Synapse Cable Connection
- Scanner Emulation Synapse Cable Connections
- RS-232 Synapse Cable Connections
- Keyboard Wedge Synapse Cable Connections
- Scanner to Enhanced Decoder Scanner Port Connection
- Scanner to Enhanced Decoder Aux Port Connection
- Scanner to Flexible Interface (RB) Module Connection
- Scanner to PLC Connection
- Scanner to SLC Connection
- 3 - Operating the Scanner
- 4 - Configuring the Scanner
- 5 - Communication Setup (Synapse Cable)
- 6 - Troubleshooting and Maintenance
- A - Specifications
- B - Scanner Pinout Collections
- C - ASCII Chart
- D - AIM Code Identifiers
- E - Advanced Data Formatting
- F - European Union Directives
- Glossary
- Index
- Back Cover
4–2 Configuring the Scanner
Publication 2755-6.4
Configuring the Scanner
1. Connect the appropriate Synapse cable to the scanner.
2. Apply power to the Synapse cable (if required).
3. Scan the Set Defaults bar code (in the Programming Guide for
2-D Bar Code Scanners) to configure the scanner with default
settings. Table 4.A lists the scanner default settings.
4. Scan individual bar codes (in the Programming Guide for 2-D
Bar Code Scanners) for parameters you want to change.
5. Scan the communication bar codes for the Synapse cable.
Scanner Default Settings
Table 4.A
Scanner Default Settings
Configuration Parameters
Default Setting
Programming
Guide Reference
Set Default Set Defaults 1-1
Symbologies
All Enabled,
except
I 2 of 5, and
Codabar
1-3
Code 39 Options
Code 39 Full ASCII Enabled 1-6
Code 39 Check Digit Disabled 1-6
UPC/EAN Options
Transmit UPC-A Check Digit Enabled 1-7
Transmit UPC-E Check Digit Enabled 1-7
Convert UPC-E to UPC-A Disabled 1-7
Decode UPC / EAN Supplemental Disabled 1-8
Convert EAN-8 to EAN-13 Disabled 1-8
UPC-A Preamble
System
Character
1-9
UPC-E Preamble
System
Character
1-9