User manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Connecting the Scanner
- Overview
- Scanner Cable Connection
- Scanner Cable to Synapse Cable Connection
- Scanner Emulation Synapse Cable Connections
- RS-232 Synapse Cable Connections
- Keyboard Wedge Synapse Cable Connections
- Scanner to Enhanced Decoder Scanner Port Connection
- Scanner to Enhanced Decoder Aux Port Connection
- Scanner to Flexible Interface (RB) Module Connection
- Scanner to PLC Connection
- Scanner to SLC Connection
- 3 - Operating the Scanner
- 4 - Configuring the Scanner
- 5 - Communication Setup (Synapse Cable)
- 6 - Troubleshooting and Maintenance
- A - Specifications
- B - Scanner Pinout Collections
- C - ASCII Chart
- D - AIM Code Identifiers
- E - Advanced Data Formatting
- F - European Union Directives
- Glossary
- Index
- Back Cover
Connecting the Scanner 2–5
Publication 2755-6.4
Scanner Emulation Synapse Cable Connections
Use the Scanner Emulation Synapse cable to provide undecoded
output to a scanner input port of a bar code decoder (cable has
female 9-pin DB connector).
Catalog No. 2755-HFC-SA1-01
A separate power supply provides power to the scanner. The power
supply plugs into the Scanner Emulation Synapse cable.
To Bar Code Decoder
Power Supply
Scanner Cable
Scanner Emulation Synapse Cable
(2755-HFC-SA1-01)
Scanner
Note: Connect the power
supply last.
!
ATTENTION: Do not install the Scanner Emulation
Synapse cable with power applied to either the Synapse
cable or decoder. Failure to follow this caution may
result in damage to the scanner, Synapse cable, or
decoder.