User manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Connecting the Scanner
- Overview
- Scanner Cable Connection
- Scanner Cable to Synapse Cable Connection
- Scanner Emulation Synapse Cable Connections
- RS-232 Synapse Cable Connections
- Keyboard Wedge Synapse Cable Connections
- Scanner to Enhanced Decoder Scanner Port Connection
- Scanner to Enhanced Decoder Aux Port Connection
- Scanner to Flexible Interface (RB) Module Connection
- Scanner to PLC Connection
- Scanner to SLC Connection
- 3 - Operating the Scanner
- 4 - Configuring the Scanner
- 5 - Communication Setup (Synapse Cable)
- 6 - Troubleshooting and Maintenance
- A - Specifications
- B - Scanner Pinout Collections
- C - ASCII Chart
- D - AIM Code Identifiers
- E - Advanced Data Formatting
- F - European Union Directives
- Glossary
- Index
- Back Cover
1–12 Scanner Features
Publication 2755-6.4
Power Supplies – Connects to RS-232,
keyboard wedge or scanner emulation
Synapse cable. Provides power to scanner➀.
• 100 - 240 VAC, 50 - 60 Hz
(Catalog No. 2755-HFP-D1)
• Power cable for power supply, IEC 320
terminated, US 110V AC
(Part No. 77121-801-01)
• Power cable for power supply, IEC 320
unterminated, US 240V AC
(Part No. 77121-801-02)
• Power cable for power supply, IEC 320
unterminated, European 240V AC
(Part No. 77121-801-03)
➀
Some applications may not require a power supply if the host provides adequate
power for the scanner. The ability of the host to provide power varies with system
configurations. Scanner with cable requires 390mA at 5 volts (typical).
Keyboard Wedge Synapse Cables –
Connects between keyboard and host device.
Host device receives decoded bar code data
the same as keyboard input. See page 2–8.
• For IBM XT/AT keyboard, 5-pin DIN
(Catalog No. 2755-HFC-SP1-01)
• For PS/2 keyboard, 6-pin Mini-DIN
(Catalog No. 2755-HFC-SP2-01)
• For DEC VT220, 320, 420 keyboards
(Catalog No. 2755-HFC-SV1-01)
• For DEC VT520 keyboards
(Catalog No. 2755-HFC-SV2-01)