User manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Connecting the Scanner
- Overview
- Scanner Cable Connection
- Scanner Cable to Synapse Cable Connection
- Scanner Emulation Synapse Cable Connections
- RS-232 Synapse Cable Connections
- Keyboard Wedge Synapse Cable Connections
- Scanner to Enhanced Decoder Scanner Port Connection
- Scanner to Enhanced Decoder Aux Port Connection
- Scanner to Flexible Interface (RB) Module Connection
- Scanner to PLC Connection
- Scanner to SLC Connection
- 3 - Operating the Scanner
- 4 - Configuring the Scanner
- 5 - Communication Setup (Synapse Cable)
- 6 - Troubleshooting and Maintenance
- A - Specifications
- B - Scanner Pinout Collections
- C - ASCII Chart
- D - AIM Code Identifiers
- E - Advanced Data Formatting
- F - European Union Directives
- Glossary
- Index
- Back Cover
1–8 Scanner Features
Publication 2755-6.4
Scanning Ranges
The scanner can read bar code symbols at various distances
depending on the type of bar codes and the bar code width
(width of bars or spaces).
This section show the read ranges for both the:
• 1-D bar codes
• 2-D bar codes
Read Ranges
1-D Bar Codes
Minimum
Bar Code Width
Read Range
(Catalog No. 2755-HTG-4)
Inches / Centimeters
6.0 mil
(.15 mm)
2.0 in to 7.25 in
(5.1 cm to 18.4 cm)
7.5 mil
(.19 mm)
2.0 in to 8.0 in
(5.1 cm to 20.3 cm)
20.0 mil
(.51 mm)
2.25 in to 13.50 in
(5.7 cm to 34.3 cm)
40.0 mil
(1.02 mm)
2.5 in to 22.0 in
(6.35 cm to 55.9 cm)
55.0 mil
(1.40 mm)
2.5 in to 30.0 in
(6.35 cm to 76.2 cm)