User manual
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Connecting the Scanner
- Overview
- Scanner Cable Connection
- Scanner Cable to Synapse Cable Connection
- Scanner Emulation Synapse Cable Connections
- RS-232 Synapse Cable Connections
- Keyboard Wedge Synapse Cable Connections
- Scanner to Enhanced Decoder Scanner Port Connection
- Scanner to Enhanced Decoder Aux Port Connection
- Scanner to Flexible Interface (RB) Module Connection
- Scanner to PLC Connection
- Scanner to SLC Connection
- 3 - Operating the Scanner
- 4 - Configuring the Scanner
- 5 - Communication Setup (Synapse Cable)
- 6 - Troubleshooting and Maintenance
- A - Specifications
- B - Scanner Pinout Collections
- C - ASCII Chart
- D - AIM Code Identifiers
- E - Advanced Data Formatting
- F - European Union Directives
- Glossary
- Index
- Back Cover
E–14 Advanced Data Formatting
Publication 2755-6.4
Beeper Definitions – Error Indications
When errors occur, the duration of tones very long.
Beeper Sequence Indication
Low–High–Low–High
Out of rule memory. Erase some existing rules,
then try to save rule again. (The current rule need
not be re-entered).
Low–Low
Cancel rule entry. Rule entry mode exited because
of an error or you asked to exit rule entry.
Low–High
Entry error, wrong bar code scanned. Re-enter
criterion or action. All previously entered criteria
and actions are retained. Criteria or action list is
too long for a rule.