Technical data

Publication 1794-2.1 - January 2000
6 Overview FLEX I/O and FLEX Integra Product Data
FLEX Integra modules mount on the DIN rail. After the module locks
into place, firmly push the Integra module into the adjacent module to
complete the backplane connection. When removing an Integra
module, insert a flat-bladed screwdriver between the modules, and
twist 1/4 turn. Then release the locking lever and remove the module.
Connection point
Hook
DIN rail A-B pt. no.
199-DR1
(35 x 7.5mm)
DIN rail
A
Locking
lever
A
41479
To remove:
41373
FLEX Integra
ATTENTION
!
The hook (on the terminal base) and adjacent
connection point (on the adapter) keep the terminal
bases tight together (see exploded view above).
These components are capable of maintaining a
reliable connection in case of shock and/or
vibration. Refer to the environmental conditions
information in each module’s specifications.